Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Midwood
If you live in Midwood and something about your chimney looks wrong, we can help. We handle mortar repointing, spalling brick repair, waterproofing, flashing repair, chimney rebuilding and tuckpointing for the brick and stucco houses that line this part of Brooklyn, and we know the specific ways chimneys here fail. Most of the housing stock in Midwood went up between the 1900s and the 1950s, which means the masonry you’re looking at has been through a lot of freeze-thaw cycles and a lot of salt air off the Atlantic. Our technicians have up to 12 years of experience, and every job starts with a Level 2 inspection and a written estimate you can see before any work is booked. Call (844) 932-2112 to start.
We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Midwood Homeowners Call Chimney Sweep East Flatbush for Chimney Repair
Midwood is full of owner-occupied houses where people stay put and look after their property, and that shows in how they approach chimney work. They want to know exactly what’s failing and why before anyone touches the masonry. That’s how we work too. We tell you exactly what we find and what it means before any work begins, and nothing gets recommended that isn’t backed by camera evidence or a direct look at the component in question.
We work with the same materials certified chimney specialists rely on nationwide – HeatShield for liner resurfacing, DuraFlex and Olympia Chimney stainless systems, and Gelco and Famco caps and crowns from the professional brands rather than hardware-store substitutes. That matters more in Midwood than in most places, for reasons we get into below around salt corrosion. One call covers sweep, inspection, cap, crown, and repair, so you don’t need to line up a second contractor when a routine cleaning turns up something structural.
Our familiarity with the blocks here runs deep. Whether you’re off Glenwood Road, near East 17th, or in the thick of the large brick houses around Ocean Avenue and Coney Island Avenue, we know what these chimneys were built like and what tends to go wrong first. Estimates are free, and the written estimate sets the final price.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Repair Services in Midwood
We cover the full range of masonry chimney repair, and we go deeper on the three that come up most often in Midwood’s coastal setting: flashing, spalling brick, and waterproofing. Here’s how each one works and when it makes sense.
Flashing Repair
Flashing is the metal that seals the joint where your chimney meets the roof, and in Midwood it’s often the first thing to fail. Salt air off the Atlantic settles on galvanised flashing and rusts it through while the brick below still looks sound from the street. When that happens, water gets in at the roofline and starts working into the masonry and framing below. A flashing repair typically runs $350 – $900 in Midwood, and we usually specify stainless or copper replacement rather than galvanised for exactly this reason – it holds up far longer against the coastal air.

Spalling Brick Repair
Spalling is when the face of a brick flakes off, usually after moisture gets in and freeze-thaw cycles work it apart. On Midwood’s older houses the brick below the crown is a common site for this, because a hairline crack in the crown lets meltwater in and the freeze-thaw pattern does the rest. Repairing individual spalled bricks and rebuilding the affected courses typically runs $500 – $1,800 depending on how many bricks are involved and how high on the chimney they sit. We match brick and mortar color as closely as we can, which matters in the landmarked parts of the neighborhood.

Chimney Waterproofing
Waterproofing is a breathable sealant applied to the masonry that keeps rain and salt-laden air from soaking in while letting moisture already inside escape. Midwood’s humid summers and damp winters mean masonry stays wet for long stretches, and an unsealed chimney absorbs that moisture season after season. A full waterproofing treatment typically runs $300 – $700 in Midwood and is the single most cost-effective thing you can do to slow the wear on old brick.

Mortar Repointing and Tuckpointing
Repointing is replacing the mortar between bricks where it’s crumbled or washed out, and tuckpointing is the finer version that finishes the joint for a cleaner line. Original mortar in Midwood’s pre-war houses is often soft and worn after decades of weather, and it needs to be matched in composition, not just filled with whatever’s on hand. Repointing usually runs $600 – $1,500 depending on how much of the chimney face needs it.
Trusted Brands We Service in Midwood
We work with DuraFlex, HeatShield, Gelco, Famco, Olympia Chimney and Copperfield, and we specify them because they hold up to the conditions in Midwood better than generic substitutes. On coastal chimneys, the difference between stainless and galvanised components is measured in years of service, and we specify stainless where we can. We don’t claim to stock every part on a truck, but we work with these brands routinely, so turnaround on caps, crowns, liners and flashing is fast. When we recommend HeatShield resurfacing, that’s a specific application that can restore a damaged liner without the cost of full replacement.
Common Chimney Repair Problems We See in Midwood Homes
- Rusted galvanised caps and flashing: Salt air settles on these components and eats through them years before the masonry shows trouble, so water gets in at the top while the chimney still looks fine from the street. Stainless replacements solve the problem for the long haul.
- Cracked clay-tile flue liners: Most Midwood houses built between the 1900s and 1950s have original clay-tile liners, and decades of use crack and spall them. Once those tiles fail, creosote and moisture reach the surrounding masonry, and wood-burning needs a relining conversation before the next fire.
- Crumbling mortar crowns: A cracked crown lets meltwater in, freeze-thaw cycles spall the brick just below it, and the leak can spread into shared flues between adjacent rowhouses. A repair on one side often means checking the neighbor’s flue connection through the common wall.
- Waterlogged masonry that never fully dries: Midwood’s humid summers and damp winters mean chimneys sit wet for long stretches between seasons, and an unsealed chimney takes on more water every year. Waterproofing slows that down, but it has to go on after any spalling and repointing are sorted.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Repair in Midwood, NY
Repair prices in Midwood reflect the age of the housing stock here and the coastal exposure, which together mean more repair work than you’d see further inland. As a rough guide, a typical flashing repair runs $350 – $900, spalling brick repair $500 – $1,800, chimney waterproofing $300 – $700, and mortar repointing or tuckpointing $600 – $1,500. A full chimney rebuild, if the damage goes deeper, runs higher and gets priced per job. What moves the number: how high on the chimney the work sits, whether the crown needs rebuilding at the same time, whether the flue liner is compromised, and whether stainless or galvanised components are specified. The written estimate sets the final price, and estimates are free. If the work can safely wait, we’ll tell you that plainly.
We Also Serve Cities Near Midwood
We work throughout this part of Brooklyn, including Flatlands, Kensington, Flatbush, and Sheepshead Bay. If you’re just outside the neighborhood line, call and we’ll let you know whether we cover your block. Our chimney repair work in Midwood and the surrounding areas follows the same process everywhere: inspection first, then a written estimate, then the repair.
Serving Midwood, NY – Our Local Coverage Area
We serve Midwood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Repair in Midwood
Salt air off the Atlantic settles on galvanised caps and flashing and corrodes them years before the brick below shows any sign of trouble. That’s why we specify stainless where we can, and why flashing repair is one of the most common jobs we do here. Call (844) 932-2112 for a free estimate.
Possibly, but not until the tiles have been inspected. Cracks and spalling in old clay tiles let creosote and moisture reach the surrounding masonry, which is a real fire and carbon-monoxide risk. A Level 2 inspection tells you whether the tiles are sound or whether relining with HeatShield or a stainless system is the safer path. Call (844) 932-2112 to book one.
The crown usually goes first. A hairline crack lets meltwater in, freeze-thaw cycles spall the brick just below the cap, and the flashing at the roofline starts to lift and rust. A qualified local pro can probe the crown and flashing, check the flue liner, and repoint or rebuild the affected courses with an overhanging crown and new stainless cap. Call (844) 932-2112 for an estimate.
Once a year is the standard, and the coastal exposure here makes it more important, not less. Salt air plus long damp stretches between seasons means components degrade quietly, and an annual inspection catches rusted flashing, cracked crowns and failing tiles before they turn into masonry damage. Call (844) 932-2112 to schedule yours.
Yes, and it’s a quirk that surprises technicians used to single-family detached homes. Many chimneys in Midwood’s historic district share flues between rowhouses, so a repair on one side often means checking the neighbor’s flue connection through the common wall to make sure the fix doesn’t push the problem sideways. We factor that into the estimate from the start. Call (844) 932-2112 to talk it through.
Book a Chimney Repair in Midwood
If your chimney is showing rusted flashing, spalling brick, a cracked crown or water getting in somewhere you can’t see, call (844) 932-2112. Estimates are free, the written estimate sets the final price, and nothing is recommended without evidence you can look at yourself. We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep East Flatbush.