Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Midwood
If your cap is rusting through or your crown has gone crumbly, you’re looking at a small repair that protects a very expensive chimney. We handle chimney cap and crown work for homeowners across Midwood, from the big brick and stucco houses of Fiske Terrace – Midwood Park to the smaller ranches and apartment buildings along Ocean Avenue and Coney Island Avenue. That mix matters, because the cap-and-crown problems we find here aren’t the same as in newer suburbs. Call (844) 932-2112 and we’ll book a time, agree a flat price before we start, and show you photos of what we find.
Why Midwood Homeowners Call Chimney Sweep East Flatbush for Chimney Cap & Crown
Most of Midwood’s housing stock went up between the 1900s and the 1950s, and those chimneys are now well into the age where mortar and flashings start failing. We know that pattern, and we know what it looks like in this part of Brooklyn. Our work with Midwood homeowners earns repeat calls because we explain the condition of a chimney plainly and don’t push work that can wait.
A chimney inspection is a safety document, not just a formality. When we look at a cap or crown in Midwood, you get a written report and a photo record you can actually use for insurance, a real estate transaction, or planning future repairs. Our technicians have up to 12 years of experience, and we bring the same materials certified chimney specialists rely on nationwide. We’re not the cheapest call you’ll make in Midwood, and we’re not trying to be. We’d rather tell you honestly that your crown has another five years in it than sell you one you don’t need. Reach us at (844) 932-2112 for an estimate, and if a call comes outside dispatch hours we book it into the next opening, Sunday through Friday, 7am to 7pm.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Midwood
Cap and crown work is where a chimney’s weatherproofing lives. Here’s what we handle in Midwood, and why each one gets called for.
Cap Installation
A correctly sized cap keeps rain, birds, and squirrels out of the flue while letting smoke escape. In Midwood, with nor’easters driving rain sideways, an undersized or poorly fitted cap lets water straight into the flue, which is where damper rust starts. We size the cap to the actual flue opening on the job, working with Gelco and Famco components rather than ordering blind and rescheduling.

Cap Replacement
Galvanized caps corrode fast in coastal air, and we replace plenty of them across Midwood where they’ve rusted to holes within a few years. Stainless steel lasts far longer and holds up better against salt-laden wind off the bay. If we’re replacing a cap, we check the flashing and the crown at the same time, because a cap sitting on a failing crown won’t seal anything.

Crown Repair
The mortar crown is the concrete lip at the top of the chimney that sheds water away from the brick. On Midwood’s early-20th-century brick chimneys, the original crown often cracks after decades of freeze-thaw cycles, and once water gets in, the brick below starts spalling. We remove the deteriorated crown, recast it with a proper overhang and slope, and check the flashing where the chimney meets the roof.

Crown Coating
Not every crown needs replacing. Where the mortar is sound but showing surface cracks, a coating can seal it and buy years before a rebuild. We use HeatShield products for crown and liner resurfacing, which can restore a compromised surface without the cost of full replacement. It’s a fix we offer when the crown is worth saving, and we’ll tell you when it isn’t.
Trusted Brands We Service in Midwood
We work with the same brands certified chimney specialists rely on nationwide: DuraFlex for relining, HeatShield for resurfacing and crown repair, and Gelco and Famco for cap and crown components. That means when we find a flue that needs relining before a cap goes back on, we’re not sending you to a second contractor. One call covers sweep, inspection, cap, crown, and repair. No parts sit in a back room waiting for you; we source the right cap for the flue we actually find. If you’re comparing estimates in Midwood, ask what brand goes into the repair, because generic hardware-store caps are what fail first.
Common Chimney Cap & Crown Problems We See in Midwood Homes
- Cracked mortar crowns on pre-war brick chimneys. On Midwood’s early-20th-century houses, the original crown takes decades of freeze-thaw punishment, and fine cracks let water in that then freezes and splits the brick below. It’s the single most common cause of spalling we see here.
- Galvanized caps rusted to holes. Coastal salt air eats galvanized steel fast, and in Midwood we routinely replace caps that were rust-through within several years of installation. Stainless steel holds up far better in this climate.
- Failed flashing at the roof line. Deteriorated flashing lets rain seep into the chimney masonry, and it gets worse with every freeze-thaw cycle. We check flashing whenever we’re on a roof for cap or crown work.
- Moisture-laden brick and rusted dampers. Nor’easters drive rain into uncapped flues, accelerating spalling of the brick and rust of the damper. A cap and a solid crown are the cheap insurance that prevents this.
See the difference
Before
After
Before
After
Before
AfterWhat Makes Midwood’s Shared Flues and Corbelled Brickwork Different
Here’s something that trips up technicians trained on detached suburban houses. In Midwood’s Fiske Terrace – Midwood Park Historic District, many chimneys were built with decorative corbelled brickwork and shared flues between adjacent rowhouses. That means when we work on one unit, we often have to inspect the neighbor’s flue connection through a common wall. A cap or crown replacement on an attached home isn’t a clean single-flue job; the corbelling has to come apart and go back together correctly, and the shared flue means the cap has to serve more than one house properly. It’s fussier work than single-family detached homes, and it’s why we’d rather see the chimney in person than quote over the phone.
Pricing for Chimney Cap & Crown in Midwood, NY
Here are typical ranges for cap and crown work in the Midwood market. Every price is an estimate, and the written estimate sets the final price. A typical cap installation in Midwood runs $250 – $650 depending on flue size and whether it’s a single or multi-flue cap. Cap replacement (pulling an old one and fitting a new stainless model) runs $275 – $700. Crown repair by removal and recast typically runs $550 – $1,500, and crown coating runs $400 – $900. A custom cap for multiple flues can run higher. Anything structural we find gets photographed and reported before work begins. Call (844) 932-2112 for a free estimate.
We Also Serve Cities Near Midwood
We look after chimney cap and crown work throughout the neighborhoods around Midwood too, including Flatlands, Kensington, Flatbush, and Sheepshead Bay. If you’re in any of them and your cap or crown is looking tired, the same approach applies: inspect first, show you the evidence, then agree on the work and the price. Our chimney cap & crown team covers the whole thing.
Serving Midwood, NY – Our Local Coverage Area
We serve Midwood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Midwood
Once a year, and sooner if you’ve been through a serious nor’easter. Coastal salt air, driven rain, and freeze-thaw cycles together wear a cap and crown faster than an inland climate, so an annual inspection catches corrosion and cracking while it’s still a small repair. Call (844) 932-2112 for an exact quote; estimates are free.
Crumbling mortar, cracks radiating from the flue, missing chunks at the edge, or brick spalling below the crown. On Midwood’s pre-war houses, the crown often fails because the original mortar wasn’t sloped enough to shed water. If you see white staining on the brick, moisture is already getting in. Call us to have it looked at.
Salt air corrodes galvanized steel quickly, and in Midwood’s coastal climate we replace caps that rusted through within a few years. Stainless steel costs more up front but lasts far longer here. Ask what material the estimate specifies, because the cheapest cap is usually the one you’ll replace soonest. Call (844) 932-2112 for a free estimate.
Not properly, no. A cap needs a sound surface to seal against, and setting one on a cracked or crumbling crown just means water gets in behind it. We repair or recoat the crown first, then fit the cap. Call for an inspection and we’ll tell you what’s safe to do now and what can wait.
It makes it more involved. In the historic district, many rowhouses share flues and decorative corbelled brickwork with their neighbors, so a technician working on one unit often has to inspect the neighbor’s flue connection through a common wall. The cap has to serve both units properly, and the brickwork comes apart and goes back together carefully. Call (844) 932-2112 to book an inspection.
If your cap is rusting or your crown is cracking, don’t wait for the next storm to make it worse. A cap and crown are the two things standing between your chimney and the weather. Call (844) 932-2112 for a free estimate, or call to book an inspection. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep East Flatbush.