Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Brooklyn Heights
If your cap is missing, rusted through, or rattling in the wind, or the crown on top of your brownstone is shedding brick and letting water in, we can help. We install, replace, and repair chimney caps and crowns throughout Brooklyn Heights, from the blocks near the Promenade to the side streets off Henry and Clinton. We answer 24/7, and a call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
Local knowledge matters here because Brooklyn Heights isn’t typical housing stock. This is a landmarked district of 19th-century brownstones and row houses, and most chimneys are original interior flues that share party walls with the neighbors on either side. A cap or crown job on one house often affects the stack next door, so we start by understanding the building, not just the opening at the top.
Call (844) 932-2112 and we’ll book a free estimate. The written estimate sets the final price.
Why Brooklyn Heights Homeowners Call Chimney Sweep East Flatbush for Chimney Cap & Crown
People in Brooklyn Heights come to us because we treat the top of the chimney as part of the building’s structure, not a hardware add-on. We work with the same materials certified chimney specialists rely on nationwide, and on these rows that matters: a cap sized wrong for an original flue opening is a draft problem waiting to happen, and a crown that doesn’t shed water properly is a slow leak into a wall you can’t see. We tell you exactly what we find and what it means before any work begins.
We carry Gelco and Famco chimney cap solutions, so cap sizing, material, and fit are addressed while we’re on the roof instead of ordered and rescheduled. For crowns, we can coat a surface that’s still sound or rebuild one that’s spalled past coating, and we explain which you actually need. Our technicians have up to 12 years of experience, and we cover the full chimney lifecycle, so if a cap inspection turns up a liner issue, you don’t need a second contractor to come back out.
We know Brooklyn Heights street by street. That local familiarity, combined with the brand stack we work with (DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield), is why homeowners here call us back when something looks wrong up top.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Brooklyn Heights
We handle six cap and crown services, and on Brooklyn Heights row houses the specifics of the building usually decide which one you need. Here are the four we’re called for most.
Cap Installation in Brooklyn Heights
A new cap keeps rain, birds, and squirrels out of an original flue that was never designed for weather protection. On the uncapped stacks common through Brooklyn Heights, we measure each opening and fit a cap that lets smoke out without choking draft in these tall, tightly built rows. We also recommend a spark arrestor screen as part of the same job.

Cap Replacement in Brooklyn Heights
Galvanized caps rust, and a loose cap on a windy block near the Promenade can end up off the chimney entirely. We pull the old cap, check the flue tile and crown for damage it may have been hiding, and fit a new one sized to the actual opening. If your cap was oversized or mismatched for a multi-flue stack, we correct that now rather than later.

Multi-Flue Cap for Party-Wall Stacks
Brooklyn Heights chimneys often serve more than one flue, sometimes back-to-back with the neighboring row house. A single-flue cap on a multi-flue party stack chokes draft and worsens smoke problems. We fit a multi-flue cap with a stainless base and screen, sized so each original flue opening gets the ventilation it needs.

Crown Repair in Brooklyn Heights
The crown is the concrete or mortar top that sheds water away from the flue and brick. When it cracks, water tracks down the liner and mortar crumbs land in the firebox. We rebuild crowns with proper overhang and flashing so the joint between crown and brick isn’t ground zero for freeze-thaw damage every winter.
Crown Coating in Brooklyn Heights
If the crown is sound but hairline-cracked, a flexible coating can seal it without a full rebuild. On old Brooklyn Heights brick, coating is often the right call when the surface is still holding together. We check first, and we tell you plainly when coating will hold and when rebuild is the honest answer.
Custom Cap Fabrication
Some Brooklyn Heights chimney tops don’t fit a stock size, especially irregular party stacks and unusually shaped original crowns. In those cases we order a custom cap measured to the chimney. It takes planning, but it’s the difference between a cap that winds up secure and one that flaps and rusts loose in a season.
Trusted Brands We Service in Brooklyn Heights
We work with a defined set of professional-grade chimney brands rather than generic hardware-store substitutes: DuraFlex for liner components, HeatShield for liner resurfacing, Gelco and Famco for caps, Olympia Chimney for broader system parts, and Copperfield. On cap and crown work, Gelco and Famco are what we reach for most, because their caps are built to handle the freeze-thaw cycle these old roofs see each winter. If a crown repair uncovers a liner problem that needs attention, DuraFlex and HeatShield resurfacing give us options short of full reliner replacement. You don’t need to source a second contractor. Call (844) 932-2112 for a free estimate.
Common Chimney Cap & Crown Problems We See in Brooklyn Heights Homes
These rows were built between the 1840s and 1890s, and most have been through coal, oil, and gas conversions in the 150 years since. That history shapes what we find up top.
- Party-wall crowns that crack and spall. Because the stack often serves back-to-back flues, a crumbling crown on one side of the wall admits water into the neighbor’s flue as well as your own. That cross-contamination between units is something a generic cap page won’t mention.
- Unlined or clay-tile flues with no cap. Rain, birds, and squirrels enter the open stack and mortar or creosote debris drops toward the damper and smoke chamber. On a tall, tightly built row, that debris is the first thing we find on a sweep.
- Oversized or mismatched single-flue caps. A cap that covers one opening of a multi-flue party stack chokes draft and turns a good fire into a smoky one. Correct sizing solves most of that.
- Crown edges bedded directly against the brick. No overhang and no proper flashing means the freeze-thaw cycle off the East River reopens the joint every winter. The crown looks fine until you inspect the edge.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Cap & Crown in Brooklyn Heights, NY
Cap and crown pricing in Brooklyn Heights is driven by the building, not a flat menu. A party-wall stack that needs a multi-flue cap and a crown rebuild is a different job from a single-flue replacement on a smaller row house. Here are the ranges we typically work from.
| Service | Typical Brooklyn Heights range |
|---|---|
| Cap installation (single flue) | $300 – $600 |
| Cap replacement (single flue) | $350 – $700 |
| Multi-flue cap | $600 – $1,200 |
| Crown coating | $400 – $800 |
| Crown repair / rebuild | $800 – $2,000 |
| Custom cap (fabricated) | $600 – $1,400 |
These are estimates, and the written estimate sets the final price. Landmarks review, if it applies to your roofline work, can affect the timeline. The estimate itself is free.
The one thing worth knowing about Brooklyn Heights crowns
In Brooklyn Heights the chimney crown is rarely a single-building concern. On these 1840s-1890s row houses the party-wall stacks serve back-to-back flues, so a crumbling crown on one side of the wall often admits water into the neighbor’s flue as well. And any rebuild above the roofline can require Landmarks Preservation Commission approval before a mason touches the brick. That’s why we inspect and document before we recommend work. You can see the photos and understand the finding, and if the work can safely wait a season, we’ll say so.
Here’s how a typical job usually goes on a tall, tightly built row house. The original brick crown has been spalling for years; freeze-thaw opens hairline cracks, water tracks down the flue liner, and mortar crumbs land in the firebox. Because the stack sits on a party wall, the same water often shows up as damp in the adjacent home’s flue. A qualified local pro typically performs a Level 2 inspection, documents the crown and flashing condition for Landmarks-sensitive work, then either coats or rebuilds the crown to shed water and fits a multi-flue cap sized for each original flue opening. Nothing above is recommended without camera evidence you can see for yourself.
We Also Serve Cities Near Brooklyn Heights
Our chimney cap & crown team covers Brooklyn Heights and the surrounding neighborhoods: Park Slope, Crown Heights, Kensington, and Flatbush. Dense rowhouse blocks, shared stacks, and similar older housing stock run across all of them, so the local knowledge carries over. If you’re in any of those, call and we’ll book a free estimate.
Serving Brooklyn Heights, NY – Our Local Coverage Area
We serve Brooklyn Heights and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Brooklyn Heights
Even a lightly used brownstone chimney should be inspected once a year. In Brooklyn Heights that’s because these original flues sit open to weather, birds, and small animals if the cap is gone, and debris can drop toward the damper faster than creosote builds. A yearly look catches a cracked crown before water reaches the liner or the neighbor’s flue. Call (844) 932-2112 to book a free estimate.
A single-flue cap installation in Brooklyn Heights typically runs $300 – $600, and a multi-flue cap for a party-wall stack runs $600 – $1,200. Custom caps, sizing for irregular openings, and any crown work found in the same visit can push the total higher. The written estimate sets the final price. Call (844) 932-2112 for an exact quote; estimates are free.
Crown coating is often done in a single visit; a full crown rebuild or Landmarks-sensitive work is usually scheduled around the estimate and any review. We answer 24/7, and a call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. We don’t promise same-day for every job, and we’ll tell you on the call what your stack actually needs. Call (844) 932-2112 for a free estimate.
Yes, we cover Brooklyn Heights street to street, from the blocks near the Promenade to the side streets off Henry and Clinton. That means party-wall stacks and shared flues are routine for us, not exceptions, and Landmarks-sensitive crown work on the 1840s-1890s rows is something we plan for. Call (844) 932-2112 and we’ll confirm your block.
Cap and crown costs in Brooklyn Heights typically run a little higher than in Park Slope or Flatbush because the landmarked housing stock and party-wall stacks add inspection and, sometimes, Landmarks review to the job. The written estimate sets the final price, and the estimate is free. Call (844) 932-2112 for an exact quote.
Get Your Cap and Crown Checked Before the Heating Season
The weather does its damage slowly. A crown that looks fine in July can be open at the edge by the first cold snap, and once water is in a shared flue, both sides of the party wall feel it. Call (844) 932-2112 for a free estimate on cap and crown work in Brooklyn Heights. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. We’ll show you what we find, explain what it means, and tell you plainly when it’s safe to wait.
Written by the team at Chimney Sweep East Flatbush.