Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Cap & Crown for East Flatbush Homeowners
A missing cap or a cracked crown lets water into the one part of your chimney you can’t see, and in East Flatbush the freeze-thaw cycles of a Brooklyn winter turn a hairline crack into spalled brick and a rusted damper within a season or two. That’s the problem we solve. Our technicians have up to 12 years of experience fitting caps and rebuilding crowns on the wood-burning and gas chimneys common in this part of Brooklyn, and we work with the same professional-grade materials certified chimney specialists rely on nationwide. Same-day cap and crown work is often possible when you call in the morning. We tell you exactly what we find and what it means before any work begins. Call (844) 932-2112 and we’ll book a visit.
What Our Chimney Cap & Crown Service Includes
Caps and crowns are two different parts of the same defense, and we handle both, plus the variations that older East Flatbush rowhouses and detached homes tend to need. Here’s what each piece of the work covers.
Cap Installation
A cap is the fitted cover that sits on top of the flue and keeps rain, snow, birds, squirrels and leaves out while letting smoke escape. You need one if the chimney has no cap at all, which is common on older homes where the original cap rusted away or was never fitted. We size the cap to your actual flue at the job site using Gelco and Famco components, so fit and material are settled on the roof rather than ordered and rescheduled.

Cap Replacement
Replacement is the right call when an existing cap is rusted through, bent, loose in the wind or the wrong size for the flue it’s covering. A damaged cap that rattles or lifts in gusts lets water in and can let downdrafts push smoke back into the house. We remove the old cap, check the flue tile and crown underneath for damage the failing cap may have caused, and fit a new one that matches the flue’s actual dimensions.

Crown Repair
The crown is the concrete or mortar slab at the very top of the chimney that sheds water away from the brick below. When it cracks, water runs into the chimney structure instead of off it, and that’s where a lot of expensive masonry damage starts. We repair cracked and crumbling crowns with proper slope and bonding so water moves away from the flue rather than sitting on it.

Crown Coating
Crown coating is a protective layer applied over a crown that’s sound but showing surface wear, small cracks or a rough, porous finish. It’s a way to extend the life of a crown that doesn’t yet need rebuilding, and it seals the small openings that let water in during freeze-thaw weather. We assess whether coating will actually hold on your crown or whether repair is the more honest answer, and we say so plainly.
Multi-Flue Cap
Many East Flatbush homes have more than one flue in a single stack, for a fireplace, a furnace or a water heater, and a multi-flue cap covers the whole assembly in one unit. These need correct spacing and airflow so each flue still drafts properly and nothing is blocked. We measure the full stack and fit a cap that covers every flue without crowding them.
Custom Cap
Some chimneys don’t fit standard sizes: oversize stacks, unusual shapes, or a top that’s been rebuilt with different dimensions than the original. A custom cap is fabricated to the actual measurements so it sits correctly instead of being forced to fit. We take the measurements on site and work with Copperfield and Olympia Chimney products to get the right match.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Brands We Service for Chimney Cap & Crown
We work with Gelco and Famco cap components, and we know how their fittings behave on the flue sizes common in this part of Brooklyn. We also service Olympia Chimney products, including the multi-flue assemblies that show up on older multi-flue stacks, and we know where those units tend to loosen or corrode first. With Copperfield custom caps, we’re familiar with how those pieces are measured and mounted so the fit is right the first time.
Knowing a brand’s weak points matters more than knowing its name. A cap that failed because it was undersized for the flue is a different fix than one that failed because the crown underneath was already crumbling, and we check both before recommending anything. Whether you have Gelco, Famco, Olympia Chimney, Copperfield or any other make, we can help.
Signs You Need Chimney Cap & Crown Right Now
Some of these you can spot from the ground. Others show up inside the house. Any one of them is worth a look before the next hard freeze.
- Water stains on the ceiling or chimney breast. Brown rings or damp patches near the chimney usually mean water is getting past the crown or around a failing cap. Left alone, that moisture works into the masonry and framing.
- Rust on the damper or firebox. Rust inside the firebox is a strong sign that rain has been coming down the flue. A cap that’s missing or off-center is often the cause.
- Birds or squirrels in the chimney. An uncapped flue is an open door for nesting animals, and nests block the flue and create a fire risk. A properly fitted cap closes that opening.
- Visible cracks or crumbling on the crown. If you can see cracks from the ground, or chunks of mortar on the roof or in the yard, the crown is failing. That’s the point where repair is far cheaper than waiting.
- Smoke coming back into the room. Downdrafts and back-puffing can come from a cap that’s the wrong size or a flue that’s partly blocked. It’s worth checking before you assume the fireplace itself is the problem.
Our Chimney Cap & Crown Process – Step by Step
- 1
We start with a look at the whole chimney, not just the top. A cap and crown sit on top of a structure that may already have problems below, so we check the flue, the firebox and the masonry before quoting cap or crown work. That way the fix at the top isn’t hiding a bigger issue underneath.
- 2
We photograph what we find and show you. You see the cracked crown, the rusted cap or the wrong-size fitting for yourself, on screen, before we recommend anything. Nothing gets sold to you that you can’t verify.
- 3
We give you a written estimate with the price set per job. The estimate is free, and the written number is the number. If the crown only needs coating rather than a rebuild, we tell you that, and if the work can safely wait until spring, we say so.
- 4
We measure and fit on site. Because we work with Gelco and Famco cap components, sizing happens at the chimney rather than from a catalog guess. The cap goes on correctly the first time, matched to your actual flue.
- 5
We check the finished job and clean up. The cap is seated and secured, the crown is sloped to shed water, and we show you the completed work before we leave. If the chimney needs a sweep or a liner assessment afterward, we can handle that too, so you’re not sourcing a second contractor.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cap & Crown Cost in East Flatbush?
A typical cap installation in East Flatbush runs $250 – $550 depending on the flue size and whether it’s a single-flue or multi-flue stack. Crown repair generally runs $350 – $800 for a standard chimney, and crown coating is usually less than a full rebuild when the crown is sound enough to coat. Custom caps for oversize or unusual stacks sit at the higher end because they’re measured and fabricated to fit.
What affects the price most: the number of flues, the condition of the crown underneath, whether the chimney is easy to access from the roof, and whether the work is a repair or a replacement. How to avoid overpaying is simple: get the crown checked at the same time as the cap, because fixing one without the other often means coming back. Every estimate we give is free, includes a camera inspection and a photo report, and the written estimate sets the final price. We’ll also tell you when work can safely wait. Call (844) 932-2112 for an exact quote.
Chimney Cap & Crown Near East Flatbush – Our Service Area
We cover East Flatbush and the neighborhoods around it, including Flatbush, Flatlands, Midwood, Crown Heights and Brownsville. Homeowners in Rockaway Beach, Bergen Beach, Sheepshead Bay, Park Slope, Brooklyn Heights and Cypress Hills can book the same service. Most visits are scheduled within a day or two of your call, and same-day work is often possible when you call in the morning. See our chimney cap & crown page for the Brownsville area, or read about chimney cap & crown work further out.
Serving East Flatbush, NY – Our Local Coverage Area
We serve East Flatbush and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Chimney Cap & Crown in East Flatbush
A cap is the fitted cover on top of the flue that keeps out rain, animals and debris, and a crown is the concrete slab at the top of the chimney that sheds water away from the brick. Cap and crown work means installing, replacing or repairing either or both so water stays out of the chimney structure. When both are in good shape, the chimney below stays dry and the masonry lasts far longer. Call (844) 932-2112 if you’re not sure which part is failing.
Most cap installations take under an hour once we’re on the roof, and crown repairs usually take a few hours depending on the size of the crown and the condition of the masonry. Crown coating is quicker than a rebuild because there’s less prep and no structural work. We give you a time estimate with your written quote so you know what to expect.
Cap installation typically runs $250 – $550, crown repair $350 – $800, and crown coating less than a full rebuild, with custom caps at the higher end. The final price depends on the number of flues, the crown’s condition and roof access. The written estimate sets the final price, and estimates are free. Call (844) 932-2112 for an exact quote.
Yes, we work with all four. We know how Gelco and Famco cap components fit on the flue sizes common in East Flatbush, how Olympia Chimney multi-flue units mount on older stacks, and how Copperfield custom caps are measured and fitted. Whether your existing cap is one of those brands or another make, we can help.
Same-day cap and crown work is often possible when you call in the morning. We answer 24/7 on the phone line, and fast dispatch from 7am to 7pm runs Sunday through Friday; we’re closed Saturday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Call (844) 932-2112 to book.
We stand behind the work we do, and the local professional you’re connected with is licensed and insured as their state requires. Any specific warranty terms are confirmed in writing with your estimate, so you know exactly what’s covered before work starts. Ask us at the time of your quote and we’ll put it in writing.
You don’t need to do much: clear access to the fireplace or flue area inside and make sure we can reach the roof. If you have documentation from a previous inspection or repair, have it ready, it helps us understand the chimney’s history. From there we handle the rest, including photos of what we find. Call (844) 932-2112 to schedule.
Schedule Your Chimney Cap & Crown Service in East Flatbush Today
A cap and crown in good repair is the cheapest protection your chimney has against water damage and the expensive repairs that follow. Call (844) 932-2112 to book a free estimate for cap installation, crown repair or a full Chimney Sweep East Flatbush inspection. We answer 24/7, fast dispatch runs from 7am to 7pm Sunday through Friday, and nothing is recommended without evidence you can see. One call covers sweep, inspection, cap, crown and repair, so you don’t need a second contractor. We also handle chimney cap & crown repairs, fireplace repair and full chimney repair across the neighborhood.
Written by the team at Chimney Sweep East Flatbush.