Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Fireplace Repair Across Park Slope
Most fireplace repair calls in Park Slope start the same way: the fire won’t draw, smoke comes back into the room, or a damper stops seating. In a brownstone, the cause usually sits above the firebox, not inside it. We’re Chimney Sweep East Flatbush, we know these buildings, and we’re set up to repair gas and wood-burning fireplaces, inserts, dampers and fireboxes in Park Slope. Fireplace repair here means diagnosing the whole flue, not swapping out the part that looks bad. Call (844) 932-2112 to get an estimate.
Why Park Slope Homeowners Call Chimney Sweep East Flatbush for Fireplace Repair
Park Slope is mostly brownstones and brick rowhouses put up between roughly 1880 and 1920, and those old chimneys haven’t been running on wood for a long time. Many now vent gas boilers, water heaters and fireplaces through clay-tile flues that are unlined or worn out. We work on that kind of chimney every day, and we know the difference between a flue that needs real repair and one that just needs a clean sweep and a cap.
We also know the neighborhood shape. The blocks around Grand Army Plaza and along Seventh Avenue are a few minutes from us, and we’re familiar with the tall shared party-wall chimneys on the side streets between Sixth Avenue and Prospect Park West. Expect a free estimate, a flat price agreed before any work starts, and a written condition report with photos of what we find. Our technicians have up to 12 years of experience, and we work with the same materials certified chimney specialists rely on nationwide, not hardware-store substitutes. Park Slope homeowners get one crew for the sweep, the inspection, the cap and the repair.
Here’s what makes us worth a call here: we tell you what we find and what it means before any work begins. We put a camera down the flue and show you the footage. If the liner is fine, we say so.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Fireplace Repair Services in Park Slope
A full fireplace service means looking at the firebox, damper, liner and cap, then repairing what’s actually failing. Here’s what that covers.
Damper Repair
A damper that won’t open, won’t close or won’t seat is the most common complaint we hear in Park Slope, and it’s usually not the real problem. If the damper is rusted shut or the frame is warped, we replace or refit it with components that suit the existing firebox. But if the damper is fine and smoke still rolls out, we camera the flue before touching anything.
Firebox Repair
Firebox brick and mortar take the direct heat, and in a century-old Park Slope fireplace, that’s where the joints crumble first. We repoint or rebuild the firebox with materials matched to the original construction. Spalling brick and mortar from a freeze-thaw-cycling crown lands in the flue too, so a firebox repair on a Park Slope brownstone usually means checking the crown above before we finish.
Fireplace Insert Service
Inserts sit inside an old flue that may never have been sized for them, and that mismatch is where draft problems come from. We check the liner size, the fit and the venting on inserts in Park Slope homes, including gas units now venting through century-old clay tile. If the liner is cracked, we’ll show you the footage and lay out the options before recommending any work.
Gas Fireplace Repair
Gas fireplaces are common in Park Slope, and they’re often vented into a flue that used to serve a coal or wood fire. That’s fine if the liner is sound and sized correctly. If it isn’t, a gas fireplace can spill combustion byproducts into the room. We inspect the venting, then repair the pilot assembly, burner or controls as needed.
Trusted Brands We Service in Park Slope
We work with professional-grade chimney components, not the generic parts pulled off a hardware-store shelf. For liner resurfacing we use HeatShield, which can restore a damaged flue without a full reliner replacement. For caps and crown work we rely on Olympia Chimney and Famco, sized and fitted on site rather than ordered and rescheduled. For a full reline, DuraFlex is a standard we use often in Park Slope’s old flues. We also handle Copperfield liners. When we recommend a part, we match it to your existing flue so it works with what’s there rather than against it.
Common Fireplace Repair Problems We See in Park Slope Homes
- Damper replaced before the flue is inspected. A rusted damper gets quoted as the problem while the cracked clay-tile liner behind it, which is the actual reason the fireplace won’t draw, goes untouched. That’s a repair you pay for twice.
- Crown spalling misread as a firebox problem. Freeze-thaw cycling on a 120-year-old chimney crown drops brick and mortar down the flue. What comes out near the firebox looks like firebox damage. It’s usually a crown and cap failure, and it needs to be fixed at the top.
- Gas service on one side of a shared chimney. A gas fireplace or insert gets serviced on one side of a party-wall chimney without checking whether the adjoining flue shares the same deteriorated liner. The defect is still next door.
- Third-degree creosote on a wood-burning fireplace. Glazed, tar-like creosote is hard to brush out and it’s a real fire risk. If a wood-burning fireplace in Park Slope hasn’t been swept in a few seasons, we check the flue staging and tell you if it can be brushed or needs chemical treatment.
See the difference
Before
After
Before
After
Before
AfterPricing for Fireplace Repair in Park Slope, NY
Here’s what fireplace repair typically costs in Park Slope. Estimates are free and the written estimate sets the final price.
- Level 2 camera inspection: $150-$400
- Damper repair or replacement: $200-$450
- Firebox repair, including repointing: $400-$1,200
- Gas fireplace or pilot repair: $200-$450
- Insert service or venting correction: $250-$600
- HeatShield liner resurfacing: $900-$2,500
- Full reline: $2,500-$6,500
What moves the price: how high the chimney runs above the roofline, whether roof access needs planning for a party-wall shared stack, and whether the repair is masonry or valve work. Repairing a firebox or damper without camera evidence can add cost later, which is why we inspect first and quote only what has to happen.
We Also Serve Cities Near Park Slope
We take fireplace repair calls in Park Slope and the nearby neighborhoods: Brooklyn Heights, Crown Heights, Kensington and Flatbush. If you’re on a block at the edge of the neighborhood, we can get to you. Park Slope sits next to Kensington, and we cover both, plus Brooklyn Heights and Crown Heights to the west and east.
Serving Park Slope, NY – Our Local Coverage Area
We serve Park Slope and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Fireplace Repair in Park Slope
Smoke spillback from a brownstone fireplace is usually a flue problem, not a firebox problem. A cracked or missing clay-tile liner, a rusted damper frame, or a smoke chamber choked with spalled brick from freeze-thaw cycling are the usual culprits. In a typical Park Slope brownstone job, a homeowner lights a fire, gets smoke back into the room and a damper that won’t seat, and the camera shows why. A Level 2 inspection comes first, before anyone quotes a repair. Call (844) 932-2112 for an exact quote – estimates are free.
Yes, and more often than either owner expects. On many Park Slope party-wall chimneys, one stack serves two adjoining brownstones, and a repair on your side frequently exposes a shared defect the neighbor never authorized anyone to look at. We document what we find so both owners understand what the stack needs. We don’t repair the neighbor’s side without permission, but we do tell you what’s there. Call (844) 932-2112 for an estimate.
No, not without proof. In Park Slope, a fireplace flue can be fine while the flue next to it, serving a gas boiler or water heater, is the one that’s deteriorated. We put a camera down and show you the footage. If the liner is sound, we say so. If it’s cracked or has gaps that need a reline, you’ll see it before you decide. Nothing gets recommended without camera evidence you can see. Call (844) 932-2112 for an estimate.
Third-degree creosote is glazed and tar-like, and a standard brush won’t remove it. Brushing a glazed flue can polish the surface and leave the layer intact. It usually takes chemical treatment or a full sweep with the right method, and if the liner has damage underneath, the flue gets repaired or resurfaced. That’s a fire risk and a draft problem at the same time. Call (844) 932-2112 for an exact quote – estimates are free.
In a Park Slope brownstone, a pilot that keeps going out in the winter is usually a draft or venting fault, not a bad thermocouple. Old flues venting gas fireplaces and boilers can pull air down through shared chimneys in cold, damp weather, and the pilot gets snuffed. We check the venting and the liner before replacing parts. If the flue needs work, we’ll show you the footage. Call (844) 932-2112 for an estimate.
Book Your Fireplace Repair in Park Slope
If your fireplace is smoking into the room, the damper won’t seat, or your gas pilot keeps dropping out, call us. We’ll camera the flue, show you what we find and quote only what’s needed. Call (844) 932-2112 for a free estimate. Our technicians have up to 12 years of experience, and we work with the same professional-grade materials certified chimney specialists rely on. Call (844) 932-2112. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep East Flatbush.