Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Inspection for East Flatbush Homeowners
A chimney that hasn’t been looked at in a few seasons can hide creosote buildup, a cracked flue tile, or a crown that’s letting water into the brickwork, and none of that shows from the ground. A proper chimney inspection in East Flatbush tells you what’s actually going on inside the flue before it turns into a fire risk or a carbon monoxide problem. Our technicians have up to 12 years of experience reading exactly these conditions in Brooklyn’s older rowhouses and detached homes, where chimneys were built to last but were never meant to go unexamined. We give you a clear condition report you can act on, whether that’s a cleaning, a cap, or nothing at all. Call (844) 932-2112 to book.
What Our Chimney Inspection Service Includes
Inspection isn’t a checkbox at the end of a sweep. It’s how we find out what your chimney needs, and it’s the document you keep. Here’s what each level covers and when it applies.
Level 1 Inspection
A Level 1 inspection is the standard annual review of the parts of your chimney and fireplace that are accessible without special tools or opening anything up. It’s what you want if your setup hasn’t changed and you just need to know it’s safe to burn. We check the firebox, damper, flue interior as far as we can see, cap, crown, and the exterior brickwork, then tell you exactly what we found and what it means. If anything looks off, we move up to a Level 2 before recommending work.
Level 2 Inspection
A Level 2 inspection goes further: it’s required when a property changes hands, after a chimney fire, after an earthquake or major storm event, or when you’ve changed the appliance or fuel type. It includes everything in a Level 1 plus a video scan of the entire flue and inspection of accessible attics, crawl spaces, and chimney components. We use this level most often for real estate transactions and for homeowners who’ve just moved in and don’t know the chimney’s history. You get photos and a written account of every defect we find.
Level 3 Inspection
A Level 3 inspection is the most involved and only happens when a Level 1 or 2 turns up a serious concern that can’t be assessed otherwise, like hidden damage behind a wall or in a concealed chimney chase. It may involve removing parts of the building structure with the homeowner’s agreement. We don’t recommend a Level 3 lightly. When we do, we explain what we expect to find and why the access is necessary before anyone touches a wall.
Camera Inspection
Camera inspection is how we see the full length of the flue without guesswork. We run a camera down the chimney and watch for cracked tiles, gaps in the liner joints, heavy creosote, and obstructions like bird nests or fallen masonry. It’s the tool that separates a real diagnosis from a sales pitch, because you can see the footage with us. We use it on almost every Level 2 and on any Level 1 where something doesn’t look right.
Flue Inspection
Flue inspection focuses on the passage the smoke travels through: the liner, its joints, the smoke chamber, and how well the flue is sized to the appliance. A flue that’s too large for the firebox drafts poorly; one that’s cracked lets carbon monoxide into the house. We check the flue for both problems, and if the liner is worn we can talk through HeatShield resurfacing as an option that restores it without full replacement.
Real Estate Inspection
A real estate inspection is a Level 2 done for a sale, purchase, or insurance review, and it produces a report a buyer, seller, or insurer can actually use. It documents the chimney’s condition at a point in time, with photos and a plain description of what needs attention and what can wait. We’ll tell you honestly when a defect is minor and when it’s a negotiating point, because you need the truth, not a reason to panic.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Brands We Service for Chimney Inspection
We work with the same professional-grade materials certified chimney specialists rely on nationwide, and that matters when an inspection turns up a component that needs attention. Olympia Chimney liners and components are common in this area, and we know where they tend to wear, especially at the joints and the top termination. Copperfield caps and dampers are another one we see often, and we can assess whether the existing unit is doing its job or letting water and animals in.
When a cap needs replacing, we work with Gelco and Famco components, so sizing and fit get handled correctly rather than punted to a special order. Whether you have Olympia Chimney, Copperfield, or any other make, we can help. The inspection itself is brand-agnostic: we look at what’s actually there and report on its condition.
Signs You Need Chimney Inspection Right Now
Some of these are urgent and some just need a look, but all of them mean it’s time to schedule. Watch for these:
- Strong smoky smell after a fire. A lingering odor can point to a blocked flue or poor draft, both of which mean smoke and gases aren’t leaving the house the way they should. A camera inspection settles it quickly.
- Visible creosote or soot at the damper. If you can see shiny, tar-like deposits, that’s glazed creosote, which ignites at lower temperatures than the fluffy kind. We check the full flue, because what you see at the damper is only the bottom of the story.
- Water stains or efflorescence on the brick. White chalky streaks or brown staining on the chimney exterior usually means water is getting in through a failing crown or cap. Left alone, it freezes and thaws through Brooklyn winters and spalls the brick.
- Debris or nests visible from the top. Birds, squirrels, and leaves block the flue and push carbon monoxide back into the living space. A cap inspection and cleaning go together here.
- You just bought the place or changed your appliance. A Level 2 inspection is the standard when a property changes hands or you switch to a new insert or fuel type. It’s the cheapest insurance you’ll ever buy on a chimney.
Our Chimney Inspection Process – Step by Step
- 1
We start with a conversation. Before we touch anything, we ask how you use the fireplace, when it was last serviced, and whether you’ve noticed smoke, smell, or staining. That tells us which inspection level fits and keeps you from paying for more than you need.
- 2
We do a visual walkaround and interior check. We look at the exterior brickwork, crown, cap, and flashing from the ground and from the roof where it’s safely accessible, and we check the firebox, damper, and smoke chamber inside. This is where most problems first show.
- 3
We run the camera. For any Level 2 or where the visual check raises questions, we scan the full flue and record what we see. You get shown the footage and photos, not just told about them.
- 4
We document everything in a written report. Every finding gets described in plain language, with photos, and sorted into what needs attention now, what can wait, and what’s fine. You keep the report; it’s useful for insurance and resale.
- 5
We walk you through it and answer questions. Nothing gets recommended without camera evidence you can see for yourself. If the chimney only needs a sweep, that’s what we’ll say. If it needs a cap or crown repair, we quote it, and the written estimate sets the price.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Inspection Cost in East Flatbush?
A typical Level 1 chimney inspection in East Flatbush runs roughly $100 to $200, and a Level 2 with camera scan usually lands between $200 and $450 depending on access and how much of the flue needs reviewing. A Level 3, which involves opening structure, runs higher and is quoted per job after we assess what’s needed. These are estimates, and the written estimate sets the final price.
What moves the number: the inspection level, whether a camera is needed, how many flues your chimney has, and access to the roof or attic. You avoid overpaying by knowing which level you actually need, which we’ll tell you up front rather than defaulting to the most expensive option. A free estimate includes a walkthrough of your setup, a clear recommendation on level, and a written quote. We don’t add a trip charge or diagnostic fee, and the price is set per job.
| Inspection Type | Typical Estimate |
|---|---|
| Level 1 (annual safety review) | $100 – $200 |
| Level 2 (with camera scan) | $200 – $450 |
| Level 3 (structural access) | Quoted per job |
Chimney Inspection Near East Flatbush – Our Service Area
We cover East Flatbush and the neighborhoods around it, including Flatlands, Midwood, Crown Heights, and Brownsville. If you’re just over the line in Flatbush or Cypress Hills, we can help there too. Booking is simple: call and we’ll find the next opening that works for you, Sunday through Friday. For a closer look at what a chimney inspection involves in a neighboring area, or to see how we handle a chimney inspection further out, the same process applies.
Serving East Flatbush, NY – Our Local Coverage Area
We serve East Flatbush and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Chimney Inspection in East Flatbush
A chimney inspection is a documented assessment of your chimney’s condition, done at one of three levels depending on what’s needed. It checks the flue, firebox, damper, cap, crown, and exterior for creosote, cracks, blockages, and water damage, and it produces a written report with photos. It’s a safety document, not just a formality, because it’s how you find out whether your chimney is safe to use.
Most Level 1 and Level 2 inspections take about an hour to an hour and a half, though a large chimney with multiple flues or difficult roof access can run longer. We’ll give you a realistic window when you book. A Level 3 is a bigger job and gets scheduled separately once we know what access is required.
Most Level 1 inspections here run $100 to $200, and a Level 2 with camera scan typically runs $200 to $450. The level, number of flues, and roof access affect the estimate. Call (844) 932-2112 for an exact quote; estimates are free.
Yes. We service Olympia Chimney liners and components and Copperfield caps and dampers, and we know where each tends to wear. If your setup uses Gelco or Famco components, we handle those too. Whether you have one of these or another make, we can help.
Same-day booking is often possible depending on the schedule. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday; we’re closed Saturday. A call outside dispatch hours is booked into the next opening.
The inspection itself is a documented report of condition at the time of service, not a repair, so it doesn’t carry a parts warranty. Any repair or replacement we quote afterward is priced by written estimate, and we’ll spell out what’s covered before you approve it. If you have questions about a report after the fact, call us and we’ll walk you through it.
Clear the area around the fireplace and make sure we can reach the damper and the roof access point. Don’t burn anything for at least 24 hours before the visit so the flue is cool and safe to inspect. If you have prior reports or receipts, have them handy; they help us understand the chimney’s history.
Schedule Your Chimney Inspection Service in East Flatbush Today
If it’s been more than a year since your chimney was looked at, or you’ve just moved in and don’t know its history, book an inspection and get a clear answer. We tell you what we find, show you the evidence, and quote any work by written estimate. Call (844) 932-2112. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. The estimate is free and there’s no obligation.
Written by the team at Chimney Sweep East Flatbush.