Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Canarsie
If a nor’easter has peeled a cap loose or left a stain spreading across your ceiling, we can help. Chimney Sweep East Flatbush handles chimney cap and crown work across Canarsie, and our technicians have up to 12 years of experience with the kind of masonry chimneys this neighborhood is built around. We know the housing stock here: detached and semi-detached houses from the 1920s through the 1960s, many with original brick stacks and flues that were first built for coal and later converted to oil or gas. That history matters when a crown cracks or a cap goes missing, and it’s why a local look beats a generic one.
Call (844) 932-2112. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Canarsie Homeowners Call Chimney Sweep East Flatbush for Chimney Cap & Crown
We’re a full-service chimney company, not a handyman with a brush. Cap and crown work sits alongside sweeps, inspections, chimney repair and fireplace repair, so when an inspection turns up a failed crown or a cap that’s seen better days, one call covers it. You don’t need to track down a second contractor for the follow-up you didn’t expect.
We work with the same materials certified chimney specialists rely on nationwide. That means Gelco and Famco components for caps, sized to the actual flue opening rather than guessed at, and proper crown coating and repair materials for the job. A chimney inspection with us is a standalone service, not a checkbox at the end of a cleaning, so you get a clear condition report you can use for insurance, a real estate transaction, or planning repair work.
Our technicians have up to 12 years of experience, and they’ve spent plenty of that time on Canarsie’s low-rise roofs. That local knowledge is what makes the difference when a stack is shared between two addresses. We tell you exactly what we find and what it means before any work begins. The estimate is free, and the price is set per job by the written estimate.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Canarsie
Cap Installation
A chimney cap is the first line of defense against weather, and on the low-rise houses around Canarsie it’s the part that takes the worst of a nor’easter. We size caps to the actual flue, using Gelco and Famco components, so wind-driven rain from Jamaica Bay runs off the cap instead of down the inside of the flue. Installation is done with the flue conditions in front of us, not from a photo.

Cap Replacement
When a cap is loose, undersized, or rusted through, replacing it is usually straightforward, but getting it right means choosing a cap that fits the flue opening and the wind exposure on that roofline. A displaced or undersized cap is a common cause of water getting into a chimney after storm season. We assess the fit, confirm the flue size, and set a replacement that stays put.

Crown Repair
The crown is the concrete top that sheds water away from the chimney’s brick and mortar. On older Canarsie homes, freeze-thaw spalling from salt-laden air and cold winters opens hairline cracks in the crown, so it sheds water straight into the masonry instead of away from it. We repair or rebuild crowns so the top of the stack does what it’s supposed to do.

Crown Coating
Crown coating is a way to seal and protect a crown that’s weathered but not yet failing structurally. On 1920s to 1960s masonry chimneys, a coating applied at the right stage can extend the life of the crown and head off the kind of cracking that lets water in. We’ll tell you when a coating is the right call and when a crown genuinely needs a rebuild.
Multi-Flue Cap and Custom Cap Work
Many Canarsie houses have stacks serving more than one flue, which calls for a multi-flue cap that covers the whole opening cleanly. Custom cap work handles the odd sizes and shared stacks that off-the-shelf caps don’t fit. Because these are frequently party-wall or shared stacks, we confirm which flue serves which address before ordering anything.
Trusted Brands We Service in Canarsie
We work with a professional-grade brand stack, including DuraFlex, HeatShield, Olympia Chimney, Copperfield, Gelco and Famco. These are the same materials certified chimney specialists rely on nationwide, not generic hardware-store substitutes. For cap and crown work, Gelco and Famco components cover the sizing, material, and fit questions at the job site, so the cap you get is the one your flue actually needs. That matters when a stack is older, shared, or built for coal and later converted. We don’t claim to keep parts in stock at a warehouse; what we do is bring the right materials to your job and get the work done without an unnecessary return trip.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Cap & Crown Problems We See in Canarsie Homes
- Storm-driven water under a cap. Wind-driven rain from Jamaica Bay nor’easters gets under a displaced or undersized cap and runs down the flue. Homeowners often see a ceiling stain before they notice any draft problem.
- Freeze-thaw crown cracking. Cold winters and salt-laden air open hairline cracks in the crown and mortar joints, so the crown sheds into the brick instead of shedding water off it. Once a crack opens, water gets in and freezing makes it worse.
- Flashing failures at the roofline. When flashing at the roof-to-chimney junction fails, water tracks along the stack and often shows up as staining on a party-wall shared with the neighbor’s address. It can look like a cap problem when it isn’t.
- Oversized, unlined flues from the coal era. Many Canarsie chimneys were built for coal and converted to oil or gas, leaving oversized flues with deteriorated parging or missing liners. A cap sized for the current flue, not the original one, keeps water out and supports the liner decisions that follow.
Pricing for Chimney Cap & Crown in Canarsie, NY
Pricing depends on the flue size, the number of flues, the condition of the crown, and what we find up top. On a typical Canarsie block, a standard cap installation runs roughly $250 to $650, while a multi-flue or custom cap for a shared stack runs about $450 to $1,200. Crown repair generally falls in the $400 to $1,500 range, and crown coating is usually less than a full rebuild because it protects a crown that’s still sound. A shared party-wall stack adds labor, since access and flue decisions account for the neighbor’s side. Whatever the job, the written estimate sets the final price, and the estimate is free. Call (844) 932-2112 for an exact quote.
We Also Serve Cities Near Canarsie
We also work throughout the neighborhoods around Canarsie, including Brownsville, Bergen Beach, Marine Park, and Mill Basin. The same combination of older masonry stacks, storm exposure, and shared rooflines shows up across this part of Brooklyn. If your chimney is near our Canarsie coverage and you need cap or crown work, call and we’ll set up a look.
Serving Canarsie, NY – Our Local Coverage Area
We serve Canarsie and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Canarsie
Because the combination of nor’easter wind, salt-laden Jamaica Bay air, and cold winters opens hairline cracks in the crown and mortar joints faster than on many inland chimneys. Wind-driven rain gets into those cracks, freezes, and widens them, so the crown starts shedding into the brick. A fall look often catches the problem before the heating season starts. Call (844) 932-2112 for a free estimate.
Look at the cap for looseness or a missing screen, check the crown for cracks or crumbling, and look at the flashing where the chimney meets the roof. If you see a ceiling stain or a cap that’s shifted, call before you light the first fire. A quick inspection from the roof is the surest way to know the condition. Call (844) 932-2112 to schedule one.
Yes. On a party-wall or shared stack, one stack can serve two addresses, so we confirm which flue serves which address before ordering a cap, crown, or liner material. Access and flue decisions have to account for the neighbor’s side. That pattern is common in Canarsie’s semi-detached houses and shows up far less elsewhere in Brooklyn. Call (844) 932-2112 for a look.
It can. Chimneys built for coal and later converted often have oversized flues, deteriorated parging, or missing liners, so the cap needs to be sized for the actual flue rather than the original one. Water running under a displaced cap makes those older conditions worse. If your cap is old or loose, it’s worth having it checked. Call (844) 932-2112 for an exact quote.
You usually can’t from inside the house, which is why a look from the roof settles it. A displaced or undersized cap lets water run down the flue; failed flashing at the roofline lets water track along the stack, often on a party-wall shared with the neighbor. The fix differs, so the two need to be told apart before work is quoted. Call (844) 932-2112 for a free estimate.
Whether you’ve got a cap that’s seen better days, a crown that’s cracking, or a ceiling stain that won’t go away, our Chimney Cap & Crown team is ready. Nothing is recommended without camera evidence you can see for yourself, and we’ll tell you plainly when work can safely wait. Call (844) 932-2112 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep East Flatbush.