Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Gelco Chimney Cleaning in Kensington, NY
Gelco chimney cleaning in Kensington starts with knowing what you’re actually looking at: a Gelco stainless liner, cap, or top-sealing damper inside a rowhouse chimney that may be shared with the building next door. We’re an independent service provider, not a Gelco dealer and not affiliated with the manufacturer, so our assessment is about your flue, not a catalog. Call (844) 932-2112 and we’ll book a sweep and inspection with a written quote agreed before we start.
What you’ll get is a Level 2 inspection with camera and photo documentation included, a flat-price sweep, and a straight answer about whether your Gelco assembly needs a repair or has reached the end of its life. Our technicians have up to 12 years of experience with Gelco flexible stainless liner kits, multi-flue and single-flue stainless caps, top-sealing dampers, and fireplace insert vent kits. The local pro is licensed and insured as New York State requires. We answer 24/7.
Why Kensington Residents Choose Us for Gelco Service
We work on Gelco assemblies often enough to know where they fail. That matters in a neighborhood where a chimney is rarely a simple straight shot from firebox to cap. On Kensington’s attached rowhouse blocks, a Gelco liner serving one unit may run through a flue shared along the party wall with the house next door. Diagnosing that correctly takes experience with how Gelco products are installed and how they behave inside old terracotta bores.
We’re not a Gelco dealer. We don’t carry a warranty obligation to the brand and we don’t sell you a product because it’s in a catalog. What we do is inspect, clean, and repair what’s there, using quality parts that fit. When a Gelco liner section or cap can be repaired, we say so. When it can’t, we explain why with photos you can see for yourself.
Scheduling is clear and the estimate is free. Our Gelco service covers sweep, inspection, caps, crowns, waterproofing, and fireplace repair in one call, so a problem found during the sweep doesn’t send you to a second contractor.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common Gelco Chimney Cleaning Problems We Solve in Kensington
Here’s what actually goes wrong with Gelco equipment in a neighborhood built mostly between the 1890s and the 1930s, along streets like Ocean Parkway and Church Avenue, where original terracotta liners and mortar-joint chimneys have already been through a century of use.
- Moisture-soaked insulated liner wraps. Insulated Gelco liner wraps absorb moisture through humid Brooklyn summers and degrade where the liner was snaked through a shared party-wall flue with an irregular original terracotta bore. Once that wrap is saturated, the insulating value is gone and the liner can’t be dried out in place. A camera inspection tells us whether it’s a repair or a reline.
- Stiffened top-sealing damper gaskets. Gelco top-sealing damper gaskets stiffen through freeze-thaw cycles and stop sealing, letting damp air and creosote odor drift back into the firebox. In Kensington’s old rowhouses, a couple of winters is often all it takes. A gasket replacement usually fixes it long before the whole assembly needs replacing.
- Corroded cap mounting legs at spalling crowns. Stainless Gelco caps on Kensington rowhouses loosen as their mounting legs corrode at mortar-joint crowns that are already spalling. The cap problem and the crown problem are usually the same problem. We fix the mounting surface and re-seat the cap with quality hardware rather than bolting into crumbled mortar.
- Loosened compression joints in tall flues. Compression or clamp connections on Gelco liner sections loosen over time inside a tall multi-story flue, causing draft loss and smoke spillage at the firebox. On wind-exposed rooflines along Ocean Parkway this shows up as a draft that reverses on gusty days.
- Dormant or gas-converted fireplaces with no heat to dry the flue. Many Kensington chimneys were built for coal and wood and now sit behind a gas insert, or behind nothing at all. A capped, unused flue with a failed Gelco damper gasket collects damp and creosote odor without any fire to drive it off. These need cleaning and inspection too, not just active fireplaces.
Gelco Service in Kensington: What Local Conditions Mean for Your Equipment
The specific reality of Kensington’s attached rowhouses is that a Gelco liner or cap serving one unit often sits in a chimney shared with the adjoining property along the party wall. That changes how cleaning and inspection actually work here. A genuine Level 2 inspection may need coordinated access from both sides, and flue ownership often has to be documented from two properties before anyone can quote work on the shared chase. Roof access on these blocks runs through narrow side alleys between brick buildings, so a straightforward sweep in most towns becomes a logistical job here. If we inspect your Gelco assembly and can’t tell which flue serves which firebox from your side alone, we say so and work through it rather than guessing. That’s the difference between a report you can use for insurance or a sale and a formality. Kensington’s freeze-thaw winters and humid summers also accelerate crown spalling and mortar-joint wear on these 1890s-1930s buildings, which is why cap and crown work so often comes up alongside a Gelco cap service.
Gelco Models & Products We Service in Kensington
We service Gelco flexible stainless chimney liner kits, single-wall and insulated. We handle Gelco stainless multi-flue and single-flue chimney caps, Gelco top-sealing damper assemblies, and Gelco fireplace insert liner and vent kits. When a component fails, we match it to quality parts that fit the existing assembly, whether that’s a Gelco-specific section where the assembly is still sound or a quality aftermarket stainless or gasket component when an exact Gelco match is no longer made or adds nothing. We’re independent; we’re not factory-trained or certified by Gelco, and we don’t claim to be. What we offer is a plain assessment of what’s failing and when a repair is genuinely the right call.
See the difference
Before
After
Before
After
Before
AfterGelco Service Pricing in Kensington
What drives your cost is flue count and layout, roof access, and how much of the assembly can be saved. On Kensington’s party-wall rowhouses, a shared chimney or a tight side-alley ladder route can affect the scope. A free estimate covers the sweep and Level 2 inspection, camera and photo documentation, and a written quote agreed before we book. If the crown is spalling and the cap is loose, that’s usually priced together; a liner that’s sound but has a failed damper gasket is a smaller job.
- Chimney sweep with Level 2 inspection: priced per job, quoted in writing
- Cap replacement: quoted per job by estimate
- Chimney waterproofing: quoted per job by estimate
- Damper assembly repair or replacement: quoted per job by estimate
- Liner repair or reline: quoted per job by estimate after camera inspection
Nothing is recommended without camera evidence you can see, and we say plainly when work can safely wait. Call (844) 932-2112 for an exact quote. Estimates are free.
Serving Kensington, NY – Our Local Coverage Area
We serve Kensington and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gelco Chimney Cleaning in Kensington
A Gelco stainless liner in a Kensington rowhouse almost always calls for a Level 2 inspection, because the liner sits in a shared party-wall flue on these attached blocks where access and flue ownership need documenting from two sides. A Level 1 visual check won’t capture connection problems inside a tall shared chase. Call (844) 932-2112 to book a Level 2 inspection.
Gelco top-sealing damper gaskets stiffen through freeze-thaw cycles, which is why a damper that sealed fine in fall leaks air and creosote odor by midwinter in Kensington’s climate. The gasket, not the whole assembly, is usually the culprit. We can inspect and replace the gasket.
Usually both. A loosened Gelco stainless cap on an old mortar-joint chimney points to a spalling crown that no longer holds the mounting legs, which is common on Kensington’s 1890s-1930s rowhouses. We address the mounting surface and re-seat the cap, and waterproofing is often the follow-up. Call (844) 932-2112 for an estimate.
A Gelco liner with creosote buildup can usually be cleaned and reused. A liner whose insulation is moisture-soaked, cracked, or crushed in an old Kensington flue usually can’t and is a replace call, not a patch. A camera inspection tells us which one you have. Estimates are free.
Yes. A gas-converted fireplace in Kensington still needs its Gelco liner and vent checked, because the flue was built for wood or coal and the assembly can fail with no fire to dry it. A capped, dormant flue needs inspection too, especially where a party-wall chimney is shared. Call (844) 932-2112 to book.
Service Areas Near Kensington
We also serve homeowners in Flatbush and Midwood, along with East Flatbush, Flatlands, and Brownsville. If your Gelco liner, cap, or damper sits in a shared rowhouse chimney anywhere on these blocks, the same Level 2 inspection and careful flue-ownership work applies. Call (844) 932-2112 to schedule in Kensington. We also cover Flatbush and Midwood.
Book Your Gelco Service in Kensington Today
Whether you’re seeing smoke spillage, a draft that reverses on windy days, or a cap that’s loosened on a spalling crown, we’ll inspect it with a camera, show you what we find, and quote the work in writing. Estimates are free. Call (844) 932-2112. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep East Flatbush.